The TRANSITIONS® Modular Entry Ramp is perfect for doorways to create a smooth, sturdy, and seam-free surface for wheelchair, scooter, walker, and cane users. It is made with high-strength aluminum that will never rust or corrode and has an extruded slip-resistant surface for superior traction. Ideal for doorways, sliding glass doors, and raised landings. It is lightweight and easily transported from one place to the next for added convenience. Sizes are available to accommodate thresholds up to 6.25" high. Browse through the tabs below to learn more.
|
MADE OF ALUMINUM
Made from high-strength aluminum that will not rust or corrode and can support up to 700 pounds. |
 |
|
SLIP-RESISTANT SURFACE Features a safe, extruded slip-resistant surface for superior traction. |
 |
|
ADJUSTABLE FLAP This ramp is available in 1, 1½, 2, 3, 4, 5, and 6-inch heights, however the pivoting flap can be attached to the top of the ramp to provide ¼" of additional adjustability. See "Specs" tab for accommodating height ranges. |
|
|
MODULAR DESIGN Its modular design allows you to use the ramp within its intended height range or at a lower height by removing one or multiple sections. |
 |
| 1" | |
| Material | Aluminum |
| Surface | Slip Resistant |
| Usable size w/ top flap ( L x W x H ) | 6.67" x 34" x 1" |
| Usable size w/o top flap ( L x W x H ) | 4.82" x 34" x 1" |
| Usable height range | .75" - 1.25" |
| Weight | 3 lbs. |
| Weight Capacity | 700 lbs. |
| For wheelchairs & scooters | Yes |
| For Residential Use |
Yes |
| Warranty | Lifetime |
| Degree incline |
ramp length(ft) |
Suggested usage |
|---|---|---|
| 4.8 Degree 1:12 |
Feet
Shop |
Americans With Disabilities Act compliant. |
| 7 Degree 1:8 |
Feet
Shop |
Manual wheelchair users who are independent or who have an attendant with limited strength. |
| 10 Degree 1:6 |
Feet
Shop |
Manual wheelchairs with a reasonably strong attendant, and power wheelchairs or scooters. |
| 12 Degree 1:4 |
Feet
Shop |
Power wheelchairs or scooters and manual chairs with a strong attendant. |
| 15 Degree 1:3 |
Feet
Shop |
Unoccupied wheelchair only. May be used for moving goods in a commercial or industrial setting. Restricted space unoccupied loading/unloading. |
We do all the work
$850 Installation cost
Ramp will be installed by a Certified Ramp Pro's Installer
*Most areas in the U.S.A. covered
- Choosing a selection results in a full page refresh.
